KLARO MAX
Customised solutions for the efficient treatment of large volumes of wastewater.
This is where our strengths come into play.
Specially designed for applications with a daily wastewater volume of 150 m³ or more per day, the KLARO MAX wastewater treatment plant defines itself as a safe solution at a wide variety of locations worldwide.
Our plants are characterized by their impressive performance and versatility. KLARO MAX wastewater treatment technology is designed to be very safe and robust, and is also extremely flexible when it comes to adapting to the specific requirements of a wide range of locations. From industrial plants to municipal facilities - KLARO MAX sets new standards in wastewater treatment. The efficiency of KLARO MAX is the result of state-of-the-art technology and many years of experience in the development of wastewater treatment plants. In addition, we offer the option of further optimizing the system with various additional modules to meet the individual requirements of our partners.
- Robust technology
- Individual planning
- Energy-efficient cleaning process
- Sophisticated safety principle
Advantages and features of the
KLARO MAX
- Tried and tested KLARO SBR concept
- Easy to operate
- Low maintenance
- Fully automatic backwash function of the decanter to prevent sludge discharge
- No disruptive inflow during sedimentation
- Electrical and mechanical components protected in a separate machine house
- Only wastewater-resistant components in the wastewater treatment plant
- Only selected, high-quality components
- Modular expandability
- Consideration of local conditions, climate and specific requirements in the design
- Domestic and commercial wastewater
- On-site technical service
- Low energy consumption
- Fully automated and user-friendly
- Low-wear components for low maintenance
- SBR cleaning process
- Achievable discharge values
BOD5 <10 mg/l Ntot <10 mg/l
COD <50 mg/l NH4N <5 mg/l
AFS <15 mg/l Ptot <1 mg/l
SEWERING TECHNOLOGY UP TO 5,000 PE / 750 m³
SINGLE-LINE WASTEWATER TREATMENT PLANT
The single-line KLARO MAX wastewater treatment plant treats up to 750 m³ of wastewater per day using the SBR process. The pre-storage tank ensures volume and concentration balancing, decouples the inflow from the cycles in the bioreactor and enables short-term feeding. Excess activated sludge can be temporarily stored in the sludge storage tank until disposal becomes necessary. The purified water is temporarily stored in the optional drain or chlorine contact tank and can be reused if necessary.
- SBR cleaning cycle (3 cycles per day)
- Up to 750 m³ / day
- Intermittent aeration
- Pre-storage for buffering and protection during sedimentation and clear water removal
- Sludge storage tank for intermediate storage of excess sludge
- Individual dimensioning according to climate zone, altitude, available space and specific inlet and outlet values
- Project support from planning to implementation
- Technical on-site service
- Technical service on the phone
SEWAGE TREATMENT TECHNOLOGY FROM 5,000 PE / 750 m³
TWO-TIER SEWAGE TREATMENT PLANT
The two-lined KLARO MAX wastewater treatment plant treats from 750 m³ of wastewater per day using the SBR process. By using two bioreactors, the pre-storage tank can be omitted as the inflowing wastewater is distributed alternately to both bioreactors. By delaying the two treatment cycles, only one bioreactor is fed with fresh raw wastewater during sedimentation and clear water removal. This prevents recontamination of the treated clear water by inflowing wastewater, even without a pre-storage tank.
- SBR cleaning cycle (2x 3 cycles per day)
- Alternating operation of the bioreactors
- From 750 m³ / day
- Intermittent aeration
- One large sludge storage tank or two separate sludge storage tanks possible
- Individual dimensioning according to climate zone, altitude, available space and specific inlet and outlet values
- Project support from planning to implementation
- Technical on-site service
- Technical service on the phone
COMPONENTS IN THE WASTEWATER TREATMENT PLANT
BREAKING
Removes coarse material before it enters the bioreactor
- Automatic operation with its own control system
- Reliable and durable
- Cost-effective and easy maintenance
- Simple design
- Individually adapted to the project
MATERIAL PUSH
Protects inlet during sedimentation and clear water discharge
- Low flow resistance at full opening
- Reliable sealing
- Automatic operation by geared motor
- Manual operation with handwheel possible
- Low space requirement
STRIP AERATOR
Efficient cleaning thanks to high oxygen utilization with low pressure loss
- Robust materials
- Membrane replacement in just a few seconds
- Quick and easy installation, also possible with steel rails on request
- Compatible with commercially available clamp connectors
DECANTER WITH AUTOMATIC BACKWASH
Specially developed to reduce sludge discharge in the drain
- Simple installation
- Fixed location
- Clear water discharge by gravity
- Special design to prevent sludge discharge
DRAINAGE CAP
Ensures smooth clear water drainage
- Good accessibility
- Low space requirement
- Automatic operation by gear motor
- Manual operation with handwheel possible
- Low liquid resistance
- Good control performance
SLUDGE PUMP
Conveys the excess sludge into the sludge storage tank
- Short running times
- Large passage
- Wet installation with coupling system
- Suitable for coarse solids and fibers
- Stainless steel connecting parts
- Easy handling
THE MACHINE HOUSE
The machine house should be located in the immediate vicinity of the KLARO MAX. All the important technical components that ensure smooth operation of the system are installed there. These include the control cabinet, the various compressors and the versatile additional modules. All components are protected from the weather and ensure long-lasting and efficient operation. Our engineers will be happy to help you plan the machine house!
- Individual planning of the building and arrangement of the components
- Technology is easily accessible for maintenance
- Components are protected from the weather
- Lockable
COMPONENTS IN THE MACHINE HOUSE
CONTROL BOX
Controls the cleaning process and all associated sequences to the second
- Microprocessor control
- Simple operation and fine adjustment
- Optimum overview of current processes
- Extra warning light for quick detection of faults
ROTARY LOBE COMPRESSOR
Ensures sufficient oxygen in the bioreactor
- Low maintenance
- Simple operation
- Low noise due to effective noise reduction
- Space-saving side-by-side installation
- Soft starter for longer service life
- Integrated cooling with fans
- High back pressures possible
PISTON COMPRESSOR
For automatic backwashing of the decanter
- Durable
- Extremely quiet
- Permanently high pressure
Biological SBR cleaning process
Purification through biological clarification
1. aeration
The raw wastewater enters the plant's bioreactor and is treated biologically. Strip aerators on the reactor floor ensure sufficient aeration and mixing of the entire bioreactor. The air required for this is generated by a rotary lobe compressor in the machine house. Aeration usually takes place intermittently. The microorganisms are thus optimally supplied with oxygen to efficiently purify the wastewater.
2. sedimentation
Aeration is followed by sedimentation, also known as the settling phase. During this phase, the reactor contents calm down and the activated sludge content settles. In order not to disturb the sedimentation, inflowing raw sewage is fed into the pre-storage tank (single-line systems) or into the second bioreactor (two-line systems).
3. backwash & clear water removal
After a certain time, the separation of clear water and sludge is so clear that the clear water can be removed. To ensure that suspended solids in the outlet decanter do not reach the outside, it is backwashed with the aid of a compressed air siphon before each clear water discharge
. The contents are pumped back into the bioreactor. The butterfly valve then opens and the clear water is discharged from the bioreactor by gravity.
4. excess sludge discharge
The final step in the purification process is the removal of excess sludge. The excess activated sludge formed is fed from the bioreactor into the sludge storage tank via a sludge pump. As soon as this process is complete, the constantly inflowing raw wastewater flows back into the bioreactor. In single-stream systems, the pre-storage tank is also emptied and the cleaning process starts again from the beginning with aeration.
AREAS OF APPLICATION
Settlements
Labor & military camps
Hotels & Resorts
Airports
Industrial applications
Amusement parks & sports facilities
EXTENSION MODULES
KLARO blue.cycle
The KLARO blue.cycle add-on modules offer project-specific solutions for the reuse of biologically treated wastewater.
Depending on regulations and local conditions, chlorination or UVC radiation can be used for disinfection. A sand filter is used to reduce suspended solids. Thanks to the combination of sand filter and disinfection, quality standards can be maintained and the treated wastewater can be reused without hesitation.
Areas of application
- disinfection
- filtration
- Irrigation of green spaces
CHLORING
Chemical disinfection is used for safe reuse
- Precise dosing
- Fast disinfection
- Easy to maintain
- Easy handling
- Storable thanks to depot effect
SANDFILTRATION
Reduction of suspended solids keeps the irrigation pipes clear
- Depth filtration
- Simple and constant effect
- High dirt holding capacity
- Durability of the filter material
UVC RADIATION
When chlorine is not permitted for disinfection, UVC radiation is used
- Very environmentally friendly
- Easy handling
- No residual products in clear water
- Generally recognized and widely used technology
KLARO WEBMONITOR
Web application for monitoring, operating data retrieval and remote control
- Can be integrated into your own monitoring system
- Increased operational reliability
- Fault messages via e-mail
- Full access to the wastewater treatment plant control system
- Automatic storage of data
SLUDGE DEWATERING
Reduction of sludge volume to reduce disposal effort and costs
- Long service life
- Easy cleaning and maintenance thanks to removable filter basket
- Special designs on request
PHOSPHATE PRECIPITATION
Chemical precipitation to reduce phosphate to a minimum
- Easy maintenance
- Durable materials
- Reliable dosing
- Achievement of strict limit values
ADDITION OF CARBON
Dosing of a nutrient solution containing carbon
- Bridging periods without inflow
- To support incomplete denitrification due to carbon deficiency and nitrogen oversupply
- Alternative method for phosphate elimination when conventional precipitants are not permitted