Separation technology
KLARO light fluid separator / oil separator retrofit set
KLsepa.blue is the separation unit that we use in the KLsepa.compact light fluid separators. With this separation unit we are able to meet the requirements of customers who already have the necessary tank for their separator and do not want to build a new one.
Components
of the KLARO light fluid separator retrofit set
The KLARO separation technology is so flexible that it can be used in prefabricated concrete or GRP containers. For this purpose, we offer the KLsepa.blue set-up kit (class II, 100 mg residual oil per liter) or the KLsepa.blue+ set-up kit (class I, less than 5 mg residual oil per liter), which can be used in round and angular vessels if a few parameters are observed.
- U-piece, component with uniform size up to NS 15
- Guide rod made of high quality stainless steel, optional coalescence basket
- Factory tared float
- Inlet made of durable stainless steel
- Drain made of durable stainless steel
Tank geometry
Installation in a vessel that complies with the dimensions below results in a separator that is functionally compliant with EN 8581:2002 + A1:2004 and EN 858-2:2003. The tanks must comply with the country-specific regulations.
To NS | Width b [mm] | DN [mm] |
---|---|---|
10 | ≥ 1150 | 160 |
15 | ≥ 1400 | 200 |
To NS | Diameter Ø d [mm] | DN [mm] |
---|---|---|
6 | ≥ 1000 | 160 |
10 | ≥ 1500 | 160 |
15 | ≥ 2000 | 200 |
Functionality
of the KLARO light fluid separators
Since they are in fact KLARO light fluid separators after insertion of the retrofit kit, they do not differ from the complete systems in their mode of operation. Since the wastewater is slowed down to a lower flow velocity when it enters the separator, natural separation sets in, resulting from the physical properties of the different substances. Oils and greases - also known as light liquids - are of lower density than water and thus rise to the water surface, where they combine to form a layer. Solids, on the other hand, are heavier and collect at the bottom of the tank.
This behavior can be observed with solids in any body of water and with oils whenever oil is added to water, for example, during cooking. This is already the first step to clear water, which is supported or optimized by the KLARO technology in the further separation process to achieve an even higher cleaning performance.
Accessories
The KLARO separator range is complemented by useful accessories, some of which are necessary for the operation of a separator system. In Germany, for example, warning systems and an external sampling shaft are required by law for light liquid separators.