KLARO MAX
Customised solution for the efficient treatment of large volumes of wastewater.
This is where our strengths come into play.
Specially designed for applications with a daily wastewater volume of 150 m³ or more per day, the KLARO MAX wastewater treatment plant is a reliable solution for a wide variety of locations worldwide.
Our systems are characterised by their impressive performance and versatility. The KLARO MAX wastewater treatment technology is designed to be very safe and robust, and is also extremely flexible when it comes to adapting to the specific requirements of a wide range of applications. From industrial plants to municipal facilities - KLARO MAX sets new standards in wastewater treatment. The efficiency of KLARO MAX is the result of state-of-the-art technology and many years of experience in the development of wastewater treatment plants.
We also offer the option of further optimising the system with various additional modules to meet the individual requirements of our partners.
- Robust technology
- Individual planning
- Energy-efficient treatment process
- Reliable safty principle
Adventages and facts about
KLARO MAX
- Proven KLARO SBR concept
- Simple operation
- Low maintenance intensity
- Fully automatic backwash function of the decanter to avoid suspended solids discharge
- No disruptive inflow during sedimentation
- Electrical and mechanical components protected in a separate machine house
- Only wastewater-resistant components in the wastewater treatment plant
- Only selected, high-quality components
- Modularly expandable
- Consideration of local conditions, climate and specific requirements in the design
- Domestic and commercial wastewater
- Technical on demand service
-
Low energy consumption
-
Fully automated and user friendly
-
Low-wear components for low maintenance
-
SBR-treatment process
-
Achievable discharge values:
BOD5 <10 mg/l TN <10 mg/l
COD <50 mg/l NH4N <5 mg/l
SS <15 mg/l TP <1 mg/l
TREATMENT TECHNOLOGY UP TO 5.000 PE / 750 m³
ONE-LINE WASTEWATER TREATMENT PLANT
The one-line KLARO MAX wastewater treatment plant treats up to 750 m³ of wastewater per day using the SBR process. The pre-storage tank ensures volume and concentration equalisation, decouples the inflow from the cycles in the bioreactor and enables short-term feeding. Excess sludge can be temporarily stored in the sludge storage tank until disposal becomes necessary. The treated water is temporarily stored in the optional collecting or chlorine contact tank and can be reused if necessary.
- SBR treatment cycle (3 cycles per day)
- Up to 750 m³ / day
- Intermittent aeration and mixing
- Pre-storage for buffering and as inlet protection during sedimentation and discharge
- Sludge storage tank for intermediate storage of excess sludge
- Customised dimensioning according to climate zone, altitude, available space and specific influent and effluent values
- Project support from planning to implementation
- Technical service on demand
- Technical service on the phone
TREATMENT TECHNOLOGY FROM 5.000 PE / 750 m³
TWO-LINE WASTEWATER TREATMENT PLANT
The two-line KLARO MAX wastewater treatment plant treats from 750 m³ of wastewater per day using the SBR process. By using two bioreactors, the pre-storage tank can be omitted as the inflowing wastewater is distributed alternately to both bioreactors. By delaying the two treatment cycles, only one bioreactor is fed with fresh raw wastewater during sedimentation and clear water discharge. This prevents recontamination of the treated water by inflowing wastewater, even without a pre-storage tank.
- SBR treatment cycle (2x 3 cycles per day)
- Alternating operation of the bioreactors
- Typically from 750 m³ / day
- Intermittent aeration and mixing
- One or two separate sludge tanks possible
- Customised dimensioning according to climate zone, altitude, available space and specific influent and effluent values
- Project support from planning to implementation
- Technical service on demand
- Technical service on the phone
COMPONENTS OF THE WASTEWATER TREATMENT PLANT
BAR SCREEN
Removes coarse particles before they enter the bioreactor
- Automatic operation with its own control system
- Reliable and durable
- Cost-effective and easy maintenance
- Simple design
- Customised to the project
KNIFE GATE VALVE
Protects against disruptive inflow during sedimentation and discharge
- Low flow resistance at full opening
- Reliable sealing
- Automatic operation by geared motor
- Manual operation with handwheel possible
- Low space requirement
STRIP DIFFUSORS
Efficient treatment thanks to high oxygen utilisation with low pressure loss
- Robust materials
- Membrane replacement in just a few seconds
- Quick and easy installation, also possible with steel rails on request
- Compatible with commercially available clamp connectors
DECANTER WITH AUTOMATIC BACKWASH
Specially developed to reduce suspended solids discharge in the effluent
- Simple installation
- Fixed and reliable
- Discharge by gravity
- Special construction with integrated backwash air lift
BUTTERFLY VALVE
Ensures smooth discharge
- Good accessibility
- Low space requirement
- Automatic operation by geared motor
- Manual operation with handwheel possible
- Low liquid resistance
- Good control performance
SLUDGE PUMP
Conveys the excess sludge into the sludge storage tank
- Short running times
- Large passage
- Wet installation with coupling system
- Suitable for coarse solids and fibres
- Stainless steel connecting parts
- Easy handling
THE MACHINE HOUSE
The machine house should be located in the immediate vicinity of the KLARO MAX. All the important technical components that ensure smooth operation of the system are installed there. These include the control cabinet, the various compressors and the versatile additional modules like dosing pumps. All components are protected from the weather and ensure long-lasting and efficient operation. Our engineers will be happy to assist you with the planning of the machine centre!
- Customised planning of the house and arrangement of the components
- Technology is easily accessible for maintenance
- Components are protected from the climate conditions
- Lockable
- Noise reduction
COMPONENTS OF THE MACHINE HOUSE
CONTROL CABINET
Controls the treatment process and all associated sequences to the second
- Microprocessor control
- Simple operation and fine adjustment
- Optimum overview of current processes
- Extra warning lights for quick detection of faults
ROTARY PISTON COMPRESSOR
Ensures sufficient oxygen in the bioreactor
- Low maintenance
- Simple operation
- Low noise due to effective noise reduction
- Space-saving side-by-side installation
- Soft starter for longer service life
- Integrated cooling with fans
- High back pressures possible
PISTON COMPRESSOR
For automatic backwash of the decanter
- Durable
- Extremely quiet
- Permanently high pressure
Biological SBR-treatment process
Clarification through biological purification
1. Aeration
The raw wastewater is fed into the bioreactor of the plant and is treated biologically. Strip diffusors on the bioreactor floor ensure sufficient aeration and mixing of the entire bioreactor. The air required for this is generated by a rotary piston compressor in the machine house. Aeration usually takes place intermittently. The microorganisms are thus optimally supplied with oxygen to efficiently treat the wastewater. Mixing for denitrification is ensured by short aeration sequences.
2. Sedimentation
Aeration is followed by sedimentation, also known as the settling phase. During this phase, the reactor contents calm down and the activated sludge settles. In order not to disturb the sedimentation, inflowing raw sewage is channelled into the pre-storage tank (one-line systems) or into the second bioreactor (two-line systems).
3. Backwash & discharge
After a certain time, the separation of clear water and sludge is so clear that the discharge can start. To ensure that suspended solids in the decanter do not reach the effluent, it is backwashed with the aid of a compressed air lift before each discharge. The contents are pumped back into the bioreactor. Afterwards the butterfly valve opens and the clear water is discharged from the bioreactor by gravity.
4. Sludge return
In the final step of the cleaning process the excess sludge is removed. The excess activated sludge formed is channelled from the bioreactor into the sludge storage tank via a sludge pump. As soon as this process is complete the continuously flowing raw wastewater runs back into the bioreactor. In one-line systems, the pre-storage tank is also emptied and the treatment process starts again from the beginning with aeration.
AREAS OF APPLICATION
Settlements
Work & military camps
Hotels & Resorts
Airports
Industrial applications
Theme parks & sports facilities
ADDITIONAL MODULES
KLARO blue.cycle
The KLARO blue.cycle additional modules offer projectspecific solutions for the reuse of biologically treated wastewater.
Depending on the regulations and local conditions, chlorination or UVC radiation can be used for disinfection. A sand filter is used to reduce the suspended solids. Thanks to the combination of sand filter and disinfection, the quality standards can be maintained and the treated wastewater can be used for other purposes without hesitation.
Areas of application
Disinfection
Filtration
Irrigation of green spaces
CHLORINATION
Chemical disinfection is used for safe reuse
- Precise dosing
- Fast disinfection
- Easy to maintain
- Simple handling
- Storable thanks to depot effect
SAND FILTRATION
Reduction of suspended solids keeps the irrigation pipes clear
- Depth filtration
- Simple and constant effect
- High dirt holding capacity
- Durability of the filter material
UVC RADIATION
If chlorine is not permitted for disinfection, UVC radiation is used
- Very environmentally friendly
- Simple handling
- No residual products in the effluent
- Generally recognised and widely used technology
KLARO WEBMONITOR
Web application for monitoring, operating data retrieval and remote control
- Integration into own monitoring system possible
- Increased operational reliability
- Fault messages via e-mail
- Full access to the wastewater treatment plant control system
- Automatic storage of data
SLUDGE DEWATERING
Reducing the amount of sludge to minimise disposal effort and costs
- Long service life
- Easy cleaning and maintenance thanks to removable filter basket
- Customised designs on request
PHOSPHATE PRECIPITATION
Chemical precipitation to reduce phosphate to a minimum
- Easy maintenance
- Durable materials
- Reliable dosing
- Achievement of strict limit values
CARBON DOSING
Dosing of a carbonated nutrient solution
- Bridging periods without inflow
- To support incomplete denitrification due to carbon deficiency and nitrogen oversupply
- Alternative method for phosphate elimination if conventional precipitants are not authorised